Fujitsu PRIMERGY RX100 S7 - Disconnecting the BBU Cable from the BBU; Removing the Riser Module 2

RX100 S7 Upgrade and Maintenance Manual 253
Expansion cards and backup units
9.5.3.5 Disconnecting the BBU cable from the BBU
Figure 163: Disconnecting the BBU cable from the BBU
Ê Disconnect the BBU cable from the BBU.
9.5.3.6 Removing the riser module 2
Ê Remove the riser module 2 as described in section "Removing the riser
module 2" on page 204.