Fujitsu PRIMERGY RX600 S5 - Replacing SFP+ Transceiver Modules; Removing an SFP+ Transceiver Module

126 Operating Manual RX600 S5
Non-hot-plug components CSS components
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-4891-003.fm
8.2.3 Replacing SFP+ transceiver modules
For Fiber Channel over Ethernet (FCoE) configurations, the ethernet server
adapter is equipped with one or two SFP+ (small form-factor pluggable)
transceiver modules.
In order to remove, install or replace an SFP+ transceiver module, please
proceed as follows.
8.2.3.1 Removing an SFP+ transceiver module
Figure 42: Removing the protective optical port plug
Ê If present, remove the protective optical port plug from the SFP+ transceiver
module.
V CAUTION!
Save the protective port plug for future use.