28 Service Supplement RX600 S6
Replacement routines
Removing the front panel fan board
Ê Disconnect all cables connected to the front panel fan board.
Figure 10: Removing the front panel fan board
Ê Undo the four screws (see circles in figure above) to loosen the front panel
fan board.
Ê Shift the front panel fan board in the direction of the arrow (see figure above)
to move it out of the grounding brackets and lift it out of the housing.
To install the front panel fan board follow the above steps in reverse.
I Make sure that the front panel fan board is set properly into the grounding
brackets.
To Next Page
Loading...
