44 Service Supplement RX600 S6
Replacement routines
Ê Remove the protective plastic covers from the processor sockets of the new
system board and fit them onto the sockets of the defective system board
which will be sent back to spares.
I Returned system boards without these covers probably have to be
scrapped.
Installing the new system board
Ê Check the settings on the new system board (for a description see the
Technical Manual of the system board).
Figure 24: Inserting the system board
Ê Carefully insert the system board as follows:
– Grasp the system board by the two handles (see figure 23 on page 43).
– Insert the system board into the housing. Adjust it over the grounding
brackets (see ovals in figure above).
To Next Page
Loading...
