TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 193
Power supply
Figure 90: Cabling the power backplane (A)
Ê Reconnect all cables to the power backplane:
Ê Fold and run the cables through the cable clamps on the server floor as
shown (see close-up).
# Connector Cable
1 X21 Power cable T26139-Y3952-V601
2 X20 System power cable T26139-Y3758-V9
3 X25 PSU signal cable T26139-Y4027-V1
To Next Page
Loading...
