A26361-K881-Z102-4-7619 41
Hardware Installation Installing/Removing the Rack Model into the Rac
Figure 10: Mounting the articulated cable carrier
Ê Fix the articulated cable carrier with two mounting screws on the rear right
support upright.
Figure 11: Routing the cables on the articulated cable carrier
Ê Route the cables as shown in the figure and secure them to the articulated
cable carrier with cable ties (1).
V CAUTION!
In order to avoid damages at fibre channel optical waveguide cables
these must be encased with a protective hose (see Routing the fibre
channel optical waveguide cable).
To Next Page
Loading...
