A26361-K881-Z102-4-7619 43
Hardware Installation Installing/Removing the Rack Model into the Rac
Routing the fibre channel optical waveguide cable
The protective hose (length approx. 1m) supplied with the mounting kit has a
separable design.
Figure 13: Mounting the protective hose
Ê Separate the outside protective sheath (1) from the inside sheath.
Ê Carefully laid the fibre channel optical waveguide cable (3) into the inside
protective sheath (2).
Ê Push the outside protective sheath (1) over the inside protective sheath.
V CAUTION!
The sheath openings must be arranged moving in opposite direction as
shown in the sectional view A-B.
To Next Page
Loading...
