Fujitsu ScanSnap S1300i - Page 350

Creating Scanned Images Depending on Intended Use (for Mac OS Users)
350
5. Load a document in the ScanSnap.
For details, refer to "How to Load Documents" (page 50).
6. Press the [Scan] button on the ScanSnap to start a scan.
 Image data of the scanned side of the document is saved.
HINT
When you select [Simplex scan] from the ScanSnap Manager menu, scanning is performed in
simplex mode even if [Duplex Scan (Double-sided)] is specified for [Scanning side] in the [Scanning]
tab.