ScanSnap Setup Window
When you click the ScanSnap Manager icon while holding down the [control] key on the
keyboard, and then select [Settings] from the "ScanSnap Manager Menu" (page 41), the following
ScanSnap setup window appears.
In the ScanSnap setup window, you can use the [Use Quick Menu] checkbox to specify whether or
not to use the Quick Menu. You can also use the profile buttons and detail setting tabs to specify
scan settings according to your scanning needs.
For details, refer to the ScanSnap Manager Help.
Profile Buttons
Detail Setting Tabs
HINT
When SV600 and one of iX500, iX100, S1500, S1500M, S1300i, S1300, S1100i, and S1100 are
connected to a computer, you can change the scan settings for each of the connected ScanSnap
models by selecting the model name from [Scanner] on the ScanSnap setup window.
ScanSnap Setup Window
44
To Next Page
Loading...
