Fujitsu SCENIC S - Indicators on the PC

Preparation for use and operation Indicators on the PC
18 A26361-K523-Z100-6-7619
Indicators on the PC
2
3
5
1
6
4
1 = Indicator SmartCard reader
2 = Floppy disk indicator
3 = Power-on indicator
4 = ON/OFF switch
5 = Hard disk indicator
6 = Message indicator
1 - SmartCard reader indicator
SmartCard reader
The indicator lights up when the SmartCard reader is accessed. You may only remove the
SmartCard when the indicator is unlit.
2 - Floppy disk indicator
The indicator lights up when the floppy disk drive of the PC is accessed. You may only remove the
floppy disk when the indicator is unlit.
3 - Power-on indicator
· green:
The PC is on.
· orange:
The PC is ready-to-operate.
In this mode the PC consumes very little power and can be switched on at the ON/OFF switch.
If the remote-on function is Enabled in the BIOS Setup, the PC can be switched on by an
incoming message (e. g. fax, telephone call, or Alert on LAN).