System expansions
A26361-K523-Z100-6-7619 35
Closing the casing
1
1
Ê Replace the top cover from above so that the guides on the inside of the top cover fit into the
guide rails on the underside of the casing.
Ê Push the top cover in the direction of the arrow until it engages.
Ê Fasten the casing using the screws (1).
Ê Return the system unit to its original position.
Ê If you have disconnected cables, reconnect them to the connectors on the rear panel.
Ê Replace any anti-theft protection devices.
To Next Page
Loading...
