System expansions
50 A26361-K523-Z100-6-7619
Installing the drive cage
2
Ê Place the drive cage into the casing and push it towards the front (1). When doing so, be sure
to place the drive cage correctly into the guide rails.
Ê Fix the drive cage with the screw (2).
!
For cooling, protection against fire and in order to comply with EMC regulations, you must
refit the safety covers if necessary.
Ê Mount the existing safety covers if necessary.
Ê Press the drive cover into the front panel until it snaps in place.
Ê Close the casing (see "Closing the casing“).
i
You may have to check the entry for the drive in the BIOS Setup.
To Next Page
Loading...
