System expansions
A26361-K523-Z100-6-7619 51
Changing the floppy disk drive
Ê Open the casing (see "Opening the casing“).
Ê Remove the data and power supply connectors from the floppy disk drive.
Ê Remove the drive cage (see "Removing an accessible drive").
2
1
4
Ê Remove the screws (2) and take the drive out of the carrier (2).
Ê Take the new floppy disk drive out of its packaging.
Ê Push the drive into the carrier (3), and fix it with the screws (4).
Ê Install the drive cage (see "Removing an accessible drive").
Ê Fit the data and power supply connectors to the floppy disk drive.
Ê Close the casing (see "Closing the casing“).
i
You may have to check the entry for the drive in the BIOS Setup.
To Next Page
Loading...
