Fujitsu SCENIC S - Installing and Removing the Hard Disk Drive

System expansions
52 A26361-K523-Z100-6-7619
Installing and removing the hard disk drive
Ê Open the casing (see "Opening the casing“).
Ê Remove the drive carrier (see "Removing an accessible drive").
Removing the hard disk carrier
Ê Lift the hard disk carrier out of the system unit in the direction of the arrow.
Ê Remove the data and power supply connectors from the hard disk drive.
Removing a hard disk drive
1
Ê Remove the screws (1).
Ê Take the hard disk drive out of the carrier (2).