4-42 SPARC Enterprise M8000/M9000 Servers Service Manual • June 2010
10. Divide the remaining cables into three routes (about 12 cables per route), bind
the cables on each route with a short hook-and-loop fastener, and allow them to
hang from the fastener. (See (8) in
FIGURE 4-14.)
Caution – Adjust the positioning of the routes appropriately so that the cables do
not cover a PCI cassette at the front of an IOU.
FIGURE 4-14 Magnified View of Part B (M8000, rear view)
To Next Page
Loading...
