Fujitsu SPARC Enterprise M9000 - Corresponding Components and Doors that Can be Accessed

5-2 SPARC Enterprise M8000/M9000 Servers Service Manual • June 2010
2. Push the projection down below the handle.
The part below the handle projects outward.
3. Turn the handle counterclockwise and pull it out to open the door.
To close the door, reverse the above steps for opening it.
FIGURE 5-1 How to Open a Door (Front Door as an Example)
5.2 Corresponding Components and Doors
That Can Be Accessed
TABLE 5-1 indicates which door should be opened to access a certain component.
Components are represented by their abbreviated names. For their formal names, see
TABLE B-1 in Appendix B.