Chapter 13 PCI Slot Device Replacement 13-13
Caution – If the card is short, move the screw at the bottom of the cassette as
required. In such cases, place the latches as close as possible to the far end of the
card. (
FIGURE 13-9 reference)
To shift the location of the bottom screw for the PCI card, first secure the card at the
lower latch (part a in
FIGURE 13-8). Then, tighten the fixing screws in the sequence of
1-2 shown in FIGURE 13-8 to fix the card in position.
FIGURE 13-9 Latch Positions at the Bottom of the Cassette
12. Mount the PCI cassette.
a. Pull the lever of the PCI cassette until the PCI cassette is pulled out
completely.
b. Align the PCI cassette with the groove of the PCI slot, and insert the PCI
cassette.
c. Press the upper part of the cassette until the cassette is inserted in the same
position as the other cassettes.
d. Push in the lever.
To Next Page
Loading...
