Fujitsu SPARC Enterprise M9000 - Page 86

2-40 SPARC Enterprise M8000/M9000 Servers Service Manual • June 2010
The following example shows output for the prtdiag command in verbose mode.
# prtdiag -v
System Configuration: Sun Microsystems sun4u XXXX SPARC Enterprise M8000 Server
System clock frequency: 960 MHz
Memory size: 32768 Megabytes
==================================== CPUs ====================================
CPU CPU Run L2$ CPU CPU
LSB Chip ID MHz MB Impl. Mask
--- ---- ---------------------------------------- ---- --- ----- ----
00 0 0, 1, 2, 3, 4, 5, 6, 7 2640 6.0 7 144
00 1 8, 9, 10, 11, 12, 13, 14, 15 2640 6.0 7 144
00 2 16, 17, 18, 19, 20, 21, 22, 23 2640 6.0 7 144
00 3 24, 25, 26, 27, 28, 29, 30, 31 2640 6.0 7 144
============================ Memory Configuration ============================
Memory Available Memory DIMM # of Mirror Interleave
LSB Group Size Status Size DIMMs Mode Factor
--- ------ ------------------ ------- ------ ----- ------- ----------
00 A 16384MB okay 1024MB 16 no 8-way
00 B 16384MB okay 1024MB 16 no 8-way
========================= IO Cards =========================
LSB Name Model
--- -------------- ------------
00 scsi LSI,1064
00 network N/A
00 network N/A
00 scsi LSI,1064
00 network N/A
00 network N/A