Contents vii
2.8 Using the Troubleshooting Commands 2–34
2.8.1 Using the showlogs Command 2–34
2.8.2 Using the fmdump Command 2–35
2.8.3 Using the fmadm Command 2–35
2.8.3.1 fmadm config Command 2–35
2.8.3.2 fmadm faulty Command 2–36
2.8.3.3 fmadm repair Command 2–36
2.8.4 Using the fmstat Command 2–37
2.9 Traditional Solaris Troubleshooting Commands 2–37
2.9.1 iostat Command 2–38
2.9.1.1 Options 2–38
2.9.2 prtdiag Command 2–39
2.9.2.1 Options 2–39
2.9.3 prtconf Command 2–41
2.9.3.1 Options 2–42
2.9.4 netstat Command 2–43
2.9.4.1 Options 2–43
2.9.5 ping Command 2–44
2.9.5.1 Options 2–45
2.9.6 ps Command 2–46
2.9.6.1 Options 2–46
2.9.7 prstat Command 2–47
2.9.7.1 Options 2–47
3. Periodic Maintenance 3–1
3.1 Cleaning a Tape Drive Unit 3–1
3.2 Cleaning an Air Filter (Server) 3–2
3.3 Cleaning an Air Filter (I/O Unit) 3–5
To Next Page
Loading...
