7
Drive Configurations Submenu of the System Menu
The Drive Configurations submenu identifies the installed S-ATA drive.
Figure 3. Drive Configurations Submenu
Exiting from System Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to move to another menu, tap the desired menu name at the top of the screen.
Table 3: Fields, Options and Defaults for the Drive0 Submenu of the System Menu
Menu Field Options Default Description
Drive0:
---
[Enabled] Identifies the installed SATA drive.
Phoenix SecureCore(tm) Tiano Setup
Item Specific Help
Configures SATA Drive.
Drive Configurations
Drive0: [TOSHIBA THNSFB062GMS - 62GB ]
[Enabled]
Info System Advanced Security Boot Exit
F1 Help
ESC Exit
Select Item
Select Menu
-/+ Change Values
Enter Select ► Sub-Menu
Shift + 1 Enable or disable(!)
F10 Save and Exit
/
/
System Menu
To Next Page
Loading...
