Appendix
Recovering Your Recovery Image Using Reco very and Utility
(for new hard drive or non-boot
able hard drive)
If you have installed a new hard drive or your hard dri ve is not bootable, perform the following steps.
Note: You will need the Bootable disk and Recovery Image disk set for this recovery.
1. Power on your system. When the Fu jitsu logo appears on th e screen, press the
Enter
key.
2. Insert the bootable disk in your DVD drive, then click OK.
3. Highlight the CD/DVD option from the Boot Men u and press
Enter
.
4. Select CD/DVD boot mode: Select UEFI Mode, if applicable and press
Enter
.
While the files are being loaded from the disk, t he Fujitsu logo screen app ears
followed by a progress bar at the bottom of th e screen.
5. Choose your language, if necessary.
6. Three tool options appear: Diagnostics, Recovery and Utility. Select Recovery.
• For Windows 8.1: Select Restore full hard drive
• For Windows 7: Select Restoring the Factory Image (full hard drive recovery)
7. Click Next to confirm full ha rd drive restoration. All data on HDD will be deleted.
8. Agree to EULA by selecting Agree option and c licking Next.
9. Click Next on the Recovery Disk Check screen to verify that the bootable
disk has been inserted into the optical drive.
10. The Checking for Recovery Disk screen appears followed by the pro mpt to insert the
first disk. Click OK to continue. Repeat this step for all d isks. After all recovery disks
have been checked and the check has been comp leted, click Next.
11. Follow the prompt to reinsert the first recovery disk and click Next.
12. Click OK when you receive the final warning informing you that a ll data on drive
C will be lost. This starts the recovery process.
13. Follow the prompts to insert the next recovery disks and click OK.
14. A fter the copying of the image to t he HDD completes the restore process is
complete, click Finish to restart the system. The computer will restart automatically
and then go t hrough the firstbootprocess.
15. Follow the steps listed in “Auto I nstallation support f or essential access
software from backup location” section.
16. Download FSDM (Fujitsu Software Download Man ager) from support site and down load
all th e software applicable to the model and OS using FSDM.
17. Follow the steps listed in “Auto I nstallation support f or essential access
software downlo aded from support w ebsite.
Fujitsu 93
To Next Page
Loading...
