Fujitsu STYLISTIC Q7310 - Removing the WLAN Antennas

Page 35 of 64
Removing the WLAN antennas
Required work steps:
■ Remove keyboard
■ Remove cradle
■ Remove pen
■ Removing the LCD back cover assy
■ Remove battery
Required tools:
■ Screwdriver: Phillips, size PH00
► Remove the two M2XL3 screws (yellow circle).
► Disconnect both WLAN antenna cables (red circles).
► It may be necessary to remove the adhesive tape and the cable from the pen garage (red flash).
► After replacement, the cables must be returned to their intended positions (yellow arrows).
Service Partner only Service Partner only