Fujitsu UTY-ASSX - Page 14

En-13
Copyright© 2013-2016 Fujitsu General Limited. All rights reserved.
7-2-2 Running condition graph display screen (Individual)
Item select
Cursor
Manual scale
adjustment
z
Select display item
By clicking “Item select” shown above, you can select a display content to be shown in
the graph pane.
z
Conrm display
The value at the current cursor position is displayed in “Measured Value”.
During communication, the cursor automatically moves along to the end of the curve.
The cursor can be moved by double-clicking onto the graph and the measured
value at that point is displayed in “Measured Value”.
▪ Graphs are synchronized and are scrolled together. By switching off the sync of mul-
tiple graphs using the button, they are no longer synchronized and are able to be
scrolled individually.
Also, when the “auto scroll”
button is pressed, the graphs automatically scroll to
the right.
To stop, press the “auto scroll”
button to release automatic scroll.
z
Scaling adjustment feature (vertical axis)
Automatic adjustment
When
is pressed, the scale of the vertical axis is automatically adjusted.