Fujitsu UTY-DCGYZ3 - 2. CONTROL; 2-1. Monitoring Screen

En-13
2. CONTROL
2-1. MonitoringScreen
The following two modes are available for Monitoring screen.
(1) Monitoring point display: For the registered group, operation status can be checked or set in any of 6 groups or 12
groups display.
(2) 50 units display: For the registered R.C.G., operation status of 50 units can be checked or set by default.
(1) Monitoringpointdisplay
The number of displayed groups can be selected from 2 modes of 6 groups and 12 groups. The sample below is the
screen of 6 groups display.
R.C.G. are expanded in dotted line. (R.C.G. belonging to the tapped group are displayed.)

4

3
5
6
8








9
• When the triangle mark on the bottom-right corner is tapped, the R.C.G.
belonging to the group are displayed.
• When the R.C.G. are expanded, the bottom-right corner of square
seems to be folded.

7