Fujitsu UTY-DCGYZ3 - Page 16

En-16
[Table 1] Operation status
Thesetitemsaredisplayedatoperationstatus.→Refer to 2-1-1.
Color Icon Operation status
Light blue The operations of groups and R.C.G. are “Cool” or “Dry”.
Pink The operations of groups and R.C.G. are “Heat”.
Purple The operations of groups and R.C.G. are “Fan”, “Auto”, or “Custom Auto”.
Rainbow The operation modes of groups are mixed.
Gray The operations of all groups and R.C.G. are stopped.
Yellow
Even one unit of groups or R.C.G. is on a test operation. (Displayed regardless
of operation mode)
―
The icons of “R.C. prohibition”, “Temp. upper and lower limit”, and “Schedule”
aredisplayedwhen“ManagementStatus”ischecked.→Refer to 2-1-1.
When the room temperature is out of the room temperature sensor range, the
iconofoverupperlimitorbelowlowerlimitisdisplayed.→Refer to 2-1-1.
When the “Room Temp.” in the “Operation Status” is checked, the icon of the
roomtemperatureisdisplayed.→Refer to 2-1-1.
: Room temperature detected by wired remote controller or option sensor
: Room temperature detected by indoor unit sensor (Room temperature may
bedi󰀨erentfromtheactualroomtemperature.Whenthisiconisdisplayed,
room temperature is just for reference only. )
Display icon
• Whenrefrigerantleak,error,mismatchmode,orltersignoccursateven
one unit, the icon is displayed.
• When refrigerant leak and error occur at the same time, refrigerant leak is
displayed preferentially.