Fujitsu UTY-DCGYZ3 - 2-3. Schedule

En-21
2-2-2-4. HumanSensorSetting
Sets enabled or disabled state of “Human sensor” function.
After human is not detected and the
set time has passed, when “Auto
Save”operationor“AutoOn/O󰀨”operation
starts actually, “Operating” is displayed at
“AutoSave”or“AutoOn/O󰀨”.
  3
4
5
No. Item Description

“Auto Save” enabled/disabled
Sets enabled or disabled state of “Auto Save”. When “Auto Save” is
enabled, select the set time from 15, 30, 45, 60, 90, 120, and 180 minutes.
To disable “Auto Save”, select “Disable”.

“AutoOn/O󰀨”enabled/disabled
Setsenabledordisabledstateof“AutoOn/O󰀨”.When“AutoOn/O󰀨”is
enabled, select the set time from 15, 30, 45, 60, 90, 120, and 180 minutes.
Todisable“AutoOn/O󰀨”,select“Disable”.
3
“AutoO󰀨”enabled/disabled
Setsenabledordisabledstateof“AutoO󰀨”.When“AutoO󰀨”isenabled,
select the set time from 1 to 24 hours (with one-hour increment) To disable
“AutoO󰀨”,select“Disable”.
4
[Cancel] button Cancels the input.
5
[OK] button Determines the input.
2-3. Schedule
When the password is set at start-up, enter the password. (Refer to 3-3-5.)
(1) Tap the [Schedule] icon of left menu on the monitoring
screen.
(2) Tap the [Schedule Setting] to display the schedule setting
screen.→Refer to 2-3-1.
Tap the [Timer Edit] to display the timer detail setting screen.
→Refer to 2-3-2.
2-3-1. ScheduleSetting
Set the details of schedule.

4
6
7
5

3
(1)
(2)