Fujitsu UTY-DCGYZ3 - Page 26

En-26
No. Item Description

Timer name
Displays the timer name. The timer names are Timer 1 to 40. The smallest
unregistered number at new creation is used for the timer name.

[Delete] icon Deletes the currently displayed timer.
3
[Copy] icon
Copies the setting timer and creates the timer at the smallest unregistered
number of 1 to 40 and shifts to the new creation screen.
4
[New] icon
Creates the new timer at the smallest unregistered number of 1 to 40 and
shifts to the new creation screen.
5
[Select (Delete)] icon Enters the delete selection mode.
6
[Select (Copy)] icon Enters the copy selection mode.
7
[New] icon
Adds the list at the end of timer list. The list number is the smallest number
of 1 to 10 which is not listed.
8
“Time” Setsthetimertime.→Refer to 2-3-2-1.
9
“On”/“O󰀨” Selects“On”or“O󰀨”.Cancelsthechangebyselecting“Reset”.

“Mode”
Selects the mode. (“Auto”, “Cool”, “Dry”, “Fan” and “Heat”. Selectable
mode depends on the indoor unit)
Deletes the change by selecting “Reset”.

“Set Temp.”
Selects the “Set Temp.” with 0.5ºC (1ºF) in units. (except when “Fan” or
“O󰀨”isselected)

“Custom Auto (Cool)”*
Selects the “Set Temp.” during “Cool” operation and the “Set Temp.”
during “Heat” operation when operation mode is “Custom Auto”. (Applied
indoor unit and non-applied outdoor unit cannot be mixed.)

“Custom Auto (Heat)”*

“Fan”
Selects fan speed. “Auto”, “High”, “Med-High”, “Med”, “Med-Low”, “Low”,
“Quiet”

“RC Prohibition” Sets“R.C.Prohibition”.→Refer to 2-2-2-3.

Timer switch-over button Switches over the displayed timer.

Timer list scroll button (page feed) Displays the scroll button to switch the timer list page.

Timer list scroll button Displays the scroll button to switch the timer list by one item.

Time▲
Rearranges the list in time order when 8 “Time” is tapped.
* Displays only when a unit with “Custom Auto” function is registered.
2-3-2-1. TimerTimeSetting
Set the time of timer.


3
No. Item Description

Hour Selects the set time (hour) of timer. When selected, the time is checked.

Minute Selects the set time (minute) of timer. When selected, the time is checked.
3
“AM” / “PM”
Selects the set time (“AM” / “PM”) of timer. When selected, “AM” or “PM”
is checked.