Fujitsu UTY-DCGYZ3 - Page 32

En-32
3-2-2-1. LowNoiseTimerDetailSetting
Set the details of the low noise timer setting.
Set the item and tap the [OK] button.
(When [Select (Delete)] is selected)
Select the timer you want to delete.
When you try to delete the timer setting to the schedule,
“This timer setting cannot be deleted because it is used for
the schedule setting as well.” is displayed.
Note
(When [Select (Copy)] is selected)
Select the timer you want to copy.
Timer is added.
No. Item Description

Timer name
Displays the timer name. The timer names are Timer 1 to 7. The smallest
unregistered number at new creation is used for the timer name.

[Delete] icon Deletes the currently displayed timer.
3
[Copy] icon
Copies the setting timer and creates the timer at the smallest unregistered
number of 1 to 7 and shifts to the new creation screen.
4
[New] icon
Creates the new timer at the smallest unregistered number of 1 to 7 and
shifts to the new creation screen.
5
[Select (Delete)] icon Enters the delete selection mode.
6
[Select (Copy)] icon Enters the copy selection mode.
7
[New] icon
Adds the list at the end of timer list. The list number is the smallest number
of 1 to 5 which is not listed.
8
“Start Time”
Sets“StartTime”.→Refer to 2-3-2-1. *30-minute increments for low
noise timer
9
“End Time”
Sets“EndTime”.→Refer to 2-3-2-1. *30-minute increments for low noise
timer

“Level” Selects the level. (“Reset” / “1” / “2” / “3”)

“Priority” Selects the priority. (“Reset” / “Low Noise” / “Performance”)

Timer switch-over button Switches over the displayed timer.

Timer list scroll button (page feed) Displays the scroll button to switch the timer list page.
(To be continued)

 3 4
5
7
8 9  




6