Fujitsu UTY-DCGYZ3 - Password Setting

En-37
3-3-5. PasswordSetting
Passwordcanbesetatprogramstart-uptomaintaincondentiality.[Initialvalue:0000]
(1) Tap the MENU button.
(2) Tap the [Preference].
(3) Tap the [Password Setting].
Functions targeted by password setting
“Group Setting”
“Outdoor Unit”
“Preference”
“Maintenance”
“Installer Setting”
“Schedule Setting”
“Operation Setting”
(4) Select the process from the submenu below.
No. Item Description

“Change
Password”
Changes the password. [Initial value:
0000]
→Refer to 3-3-5-1.

“Change
Setting”
Changes the password setting.
→Refer to 3-3-5-2.
3-3-5-1. ChangePassword
(1) Set the item and tap the [OK] button.
No. Item Description

“Change
Password”
Sets 4 to 8 digits password when it is
set. (Enter the password twice.)
3-3-5-2. PasswordSetting
(1) Set the item and tap the [OK] button.
[Initial value: All “Enable”]
No. Item Description

“Group Setting” “Enable” / “Disable”

“Outdoor Unit
Settings”
“Enable” / “Disable”
3
“Preference” “Enable” / “Disable”
4
“Maintenance” “Enable” / “Disable”
5
“Installer
Setting”
“Enable” / “Disable”
6
“Schedule
Setting”
“Enable” / “Disable”
7
“Operation
Setting”
“Enable” / “Disable”
(1)
(2)
(3)




7
3
5

6
4