En-39
(4) Select the unit whose sensor value is checked.
“Indoor Unit” / “Outdoor Unit”
(5) The screen of selected unit is displayed.
(Tap the [Close] button to exit.)
For “Indoor Unit”
First line: Refrigerant system No. – Unit No. – Remote
controller address No.
Second line: Group name
Third line: R.C.G. name
For “Outdoor Unit”
Refrigerant system No. – Unit No.
(6) Sensor values of the tapped unit are displayed.
“Sensor Name”
“Value”
3 “Date&Time”
4 [Mail]:When the [Mail] button is tapped, “Send” screen is
displayed and sensor value information is sent to the set mail
address.→Refer to 3-5-8.
3-4-3. Information
The version of this software and MAC Address are displayed.
(1) Tap the MENU button.
(2) Tap the [Maintenance].
(3) Tap the [Information].
(4) The version of this software and MAC Address are displayed.
4
3
(2)
(3)
(1)
To Next Page
Loading...
