Fujitsu UTY-DCGYZ3 - Remote Setting

En-45
3-5-6. RemoteSetting
Perform the network setting for remote control.
(1) Tap the MENU button.
(2) Tap the [Installer Setting].
(3) Tap the [Remote Setting].
(4) Set the item and tap the [OK] button.
No. Item Description

“Wired LAN”
Selects whether LAN connection is
usedornot.→Refer to 3-5-6-1.

“Network
Setting”
Sets the network when LAN connection
isused.→Refer to 3-5-6-2.
3
“User ID” (*)
Sets the user ID (Max. 20 characters)
for remote login when LAN connection
is used.
The third or later users can be set from
the web. Maximum 30 users can be
registered. →Refer to 4-6.
4
“Password” (*)
Sets the user password (Max. 20
characters) for remote login when LAN
connection is used. [Initial value: 0000]
(*) Max. 20 alphanumeric characters and symbols
3-5-6-1. LANSetting
Select whether LAN connection is used or not.
(1) Set the item and tap the [OK] button.
No. Item Description

LAN Setting
Selects from the followings.
• When LAN connection is not used,
select “Disable”.
• When LAN connection is used, select
“Wired LAN”.
(1)
(3)
(2)


3 4