Fujitsu UTY-DCGYZ3 - Indoor Unit Sensor Room Temp. Display Setting; Initialization

En-50
3-5-10. IndoorUnitSensorRoomTemp.DisplaySetting
Display the room temp. to the operating indoor unit even if remote controller or option sensor is not used.
(1) Tap the MENU button.
(2) Tap the [Installer Setting].
(3) Tap the [Indoor Unit Sensor Display Setting].
(4) Tap the [Enable] or [Disable].
3-5-11. Initialization
Perform the Initialization of this controller.
Allregisteredcontentswillbedeletedandreturnedtothefactorydefaultsettingbythisfunction.
Pleaseusethisfunctionwithgreatcaution.
(1) Tap the MENU button.
(2) Tap the [Installer Setting].
(3) Tap the [Initialization].
(4) When initializing this controller, tap the [OK] button.
Waitforawhilewithoutturningo󰀨thepower.
After the initial setting screen appears, set according to the
wizard.→Refer to 1-5.
(2)
(3)
(4)
(1)
(2)
(3)
(1)