Fujitsu UTY-DCGYZ3 - Operaion

En-53
[Smartphone Screen]
4-2-2. Operaion
(1) Set the item and tap the [Send] button.
No. Item Description

“Operation
mode”
Selects one of “Cool”, “Heat”, “Dry”,
“Fan”,“Auto”,and“O󰀨”.(Selectable
mode depends on the indoor unit)

“Set temp.”
Selects the “Set Temp.” with 0.5ºC (1ºF)
inunit.(exceptwhen“Fan”or“O󰀨”is
selected)
* “Set temp.
[Custom Auto]”
Selects the “Set Temp.” during “Cool”
operation and the “Set Temp.” during
“Heat” operation when operation mode
is “Custom Auto”. (Applied indoor unit
and non-applied outdoor unit cannot be
mixed.)
3
“Fan Speed” Sets the air volume.
4
“Air Flow
Direction”
Setstheairowdirectionforvertical
and horizontal directions.
5
“Individual Air
Flow Direction”
Setstheindividualairowdirection
setting.
6
[Clear All]
button
Resets the screen and returns to the
original status.
7
[Send] button
Sends the setting contents to the
Central Controller.


3 4
5 6
7


3
4
5
6
7