Fujitsu UTY-DCGYZ3 - 4-5. Environment Setting; 4-6. Account Setting

En-55
4-5. EnvironmentSetting
Set the temp. unit for this system display.
(1) Select [ºC] or [ºF] of temp. unit and tap it.
(2) Tap the [Setting] button.
4-6. AccountSetting
Maximum 30 accounts can be set. (Up to 10 accounts can be connected at the same time.)
(1) Log in with the account registered at Remote Setting of main
unitortheadministratorrightsaccount.→Refer to 4-1.
(2) Tap the MENU button.
(3) Tap the [Account setting].
(4) Tap the Add button.
(5) Set the item and tap the [OK] button.
No. Item Description

“User ID” Sets the user ID.

“Password” Sets the password.
3
“Type”
Selects the authority.
Administrator: Controls all groups.
User: Controls only the groups set at
“Group”.
In addition, account setting cannot be
operated.
4
“Group”
Selects the group to be controlled when
“User” is set for authority.* (When
“Administrator” is set for authority, this
selection is not required.)
* When you operate R.C.G which is not registered to the group,
select “Group unregistered RCG”.
(2)
(3)
(4)


3
4
(5)