Fujitsu UTY-RNRYZ5 - Control Functions; On and Off Operation; Operation Settings

2 CONTROL
2-1 OnandO󰀨
(1) Pressthe[On/O󰀨]button.
26.0
26.0
°C
°C
Cool
Auto
Set Temp.
Mode
MenuStatus
Fan
Fri 10:00AM
On/O󰀨button
Power indicator lamp
The Power indicator lamp remains lit while the indoor
unit is operating.
NOTE
The On/OFF button cannot be operated at screens other
than the monitor mode screen.
2-2 OperationSettings
2-2-1 SettheOperationMode
(1) Touch the [Mode] on the monitor mode screen.
(2) “Mode” screen is displayed. Select the operation mode.
(1) (2)
26.0
26.0
°C
°C
Cool
Auto
Set Temp.
Mode
MenuStatus
Fan
Fri 10:00AM
Mode
Cancel
Cool DryHeat
Fan
OK
Auto
Depending on the model of
the indoor unit, [Custom Auto]
is displayed instead of [Auto].
26.26.0
°C
Custom
Auto
Set Te
Mode
DryHeat
Fan
OK
Custom
Auto
NOTES
• Only selectable modes are displayed. The select-
ablemodesmaybedi󰀨erentdependingonthe
systemcongurationandoperationstatus.Refer
to[4.OPERATIONTIPS]→[4-1Selectablemodes].
• When the “Fan” is se-
lected, the temperature
cannot be set.
Fan
Auto
Set Temp.
Mode
MenuStatus
Fan
Fri 10:00AM
• [Auto] or [Custom Auto] mode can be used in the
R.C. Group to which Master Indoor Unit is set. It is
not displayed at other R.C. Group.
• When the operation mode is switched in a heat
recovery system, operation preparations may take
some time, but this is not a malfunction.
(3) When the [OK] is touched, the display returns to the
monitor mode screen.
2-2-2 SettheTemperature
(1) Touch the [Set Temp.] on the monitor mode screen.
(2) “Set Temp.” screen is displayed. Adjust the room tem-
perature with the [
] or [ ].
(1) (2)
26.0
26.0
°C
°C
Cool
Auto
Set Temp.
Mode
MenuStatus
Fan
Fri 10:00AM
26.0
26.0
°C
°C
Set Temp.
Cancel OK
When the operation mode is
set to [Custom Auto], set the
cooling and heating tempera-
ture.
20.0 28.0
°C°C
Set Temp.
Cancel OK
HeatCool
NOTES
• Thesettabletemperaturerangeisdi󰀨erentdepend-
ing on the operation mode. Refer to [4 OPERA-
TIONTIPS]→[4-3SelectableTemperatureRange].
• When the “Set Temp. Range Setting” is set, the se-
lectable temperature conforms to the setting. Refer
to[3SETTING]→[3-6SpecialSetting]→[3-6-3
Set Temp. Range Setting].
(3) When the [OK] is touched, the display returns to the
monitor mode screen.
2-2-3 SettheFanSpeed
(1) Touch the [Fan] on the monitor mode screen.
(2) “Fan” screen is displayed. Select the fan speed with the
[
] or [ ].
(1) (2)
26.0
26.0
°C
°C
Cool
Auto
Set Temp.
Mode
MenuStatus
Fan
Fri 10:00AM
Fan
Cancel OK
Auto
(3) When the [OK] is touched, the display returns to the
monitor mode screen.
En-7