- 12 -
►
Parametering the setting
▼
General
Only the parameters accessible to levels:
End user
... are described in this document.
The parameters accessible at level:
Commissioning
Engineer
… are described in the document reserved for these
professional specialists. Do not make any modications
to these parameters without advice from these
professional specialists. Incorrect use of any kind
may result in serious malfunctioning.
▼
Setting parameters
With the screen on basic display.
- Press OK.
Once in "End user" level.
- Scroll the menu list.
- Choose the desired menu.
- Scroll the function lines.
- Choose the desired line.
- Adjust the parameter.
- Check the setting by pressing OK.
- To return the menu, press ESC.
If no setting is made for 8 minutes, the screen returns
automatically to the basic display.
▼
List of "End user" settings
Line Function
Setting range
or display
Setting
increment
Basic
setting
Time of day and date
1 Hours / Minutes 00:00... 23:59 1
2 Day / Month 01.01... 31.12 1
3 Year 1900... 2099 1
Operator Section
20 Language English, Français, Italiano,
Nederlands...
English
OK
Brief
press
End user
OK OK OK
Time and date Hours / minutes 1 Hours 1...24 h
User interface Day / Month 2 Minutes 0...60 min
CC1 time program Year 3
...
Waterstage / OPERATING INSTRUCTIONS / 2010 - EN
To Next Page
Loading...
