- 49 -
►
List of function lines
Line Function
Setting range
or display
Setting
increment
Basic
setting
Time of day and date
1UHours / Minutes 00:00... 23:59 1 --:--
2UDay / Month 01.01... 31.12 1 --.--
3UYear 1900... 2099 1 ----
5SStart of Summer time (Day / Month) 01.01... 31.12 1 25.03
6SEnd of Summer time (Day / Month) 01.01... 31.12 1 25.10
The change of hour will appear at 3:00 fi rst Sunday after the regulated date.
Operator Section
20 U Language English, Français, Italiano, Nederlands... English
22 S Info Temporary, Permanent Temporary
26 S Operation locking On, Off Off
27 S Programming locking Off , On Off
28 I Direct setting Automatic storage,
With confi rmation
With
confi rmation
29 I Temperature units
Pressure units
°C, °F
bar, psi
°C
bar
44 I Operation HC2 Jointly with HC1
Independently
Jointly with
HC1
46 I Operation HC3/P Jointly with HC1
Independently
Jointly with
HC1
70 S Display software version
Time program heating / cooling, circuit 1
500 U Pre-selection (Day / Week) Mon-Sun, Mon-Fri, Sat-Sun,
Monday, Tuesday, …
Mon-Sun
501 U 1
st
phase On (start) 00:00... --:-- 10 min 6:00
502 U 1
st
phase Off (end) 00:00... --:-- 10 min 22:00
503 U 2
nd
phase On (start) 00:00... --:-- 10 min --:--
504 U 2
nd
phase Off (end) 00:00... --:-- 10 min --:--
505 U 3
rd
phase On (start) 00:00... --:-- 10 min --:--
506 U 3
rd
phase Off (end) 00:00... --:-- 10 min --:--
516 U Default values, Circuit 1 No, Yes No
Yes + OK: The default values memorised in the regulator replace and cancel the customised heating programs.
Your customised settings are therefore lost.
Waterstage Split Comfort DHW Serie / INSTALLATION / 2125 - EN
To Next Page
Loading...