Fujitsu WOxK112LCT - Electrical Connections on the Hydraulic Unit

- (CS01 - 66) -
Control system
- (CS01 - 66) -
CONTROL SYSTEM CONTROL SYSTEM
ELECTRICAL CONNECTIONS ON THE HYDRAULIC UNIT3-2.
Remove the front panel (2 screws A)
•
1
A
1
A
2
Removing the front panel
Remove the cover of the electric box (1 screw B)
•
B
3
4
Access to hydraulic unit electric box
Note:
Ensure that the general electrical power supply has been cut off before starting any repair work .
The rearmament of safety thermostat should be done by a professional .