Fujitsu WOYA060LFCA - Setting Parameters

- (CS01 - 10) -
Control system
- (CS01 - 10) -
CONTROL
SYSTEM
CONTROL
SYSTEM
CONTROL SETTING2-3.
GENERAL

The settings described below are those which can
be modied by the user.
We wish to remind you that changing the settings
below may cause the heat pump to behave in an
undesirable way. A testing period should be
conducted before the permanent settings of the
heat pump are conrmed. This may require a
number of changes to be made by the installer.
There are 3 access levels:
U: end-user level
I: commissioning level (installer start-up)
S: engineer level (specialist)
SETTING PARAMETERS

-Choose the desired level.
-Scroll the menu list.
-Choose the desired menu.
-Scroll the function lines.
-Choose the desired line.
-Adjust the parameter.
-Check the setting by pressing OK.
-To return the menu, press ESC.
If no setting is made for 8 minutes, the screen returns automatically to the basic display.
Basic
display
OK
Brief press
End user
OK
OK
OK
Time of day and date Hours / minutes 1 Hours 1...24 h
Operator section Day / month 2 Minutes 0...60 min
Time prg heating circuit 1 Year 3
Press for
3 seconds
End user Commissioning
Engineer
Time of day and date
Hours / minutes 1
Operator section
Day / Month 2
Time prg heating circuit 1 Year 3
Start of summertime 4
01.01...31.12
End of summertime 5