Fujitsu XG0224 - Vlan Forward

XG Series User's Guide Chapter 5 Command Reference
VLAN Information Settings
160
5.3.1.3 vlan forward
Function Set static forwarding rules setting.
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax vlan <vid> forward <count> <dst_addr> <port>
Options
<vid>
•
VLAN ID
Specify a VLAN ID with a decimal value.
<count>
•
Definition number
Specify it with a decimal value from 0 to 399.
<dst_addr>
•
Destination MAC address
Specify the MAC address to be added statically to the learning table.
(It must be in the xx:xx:xx:xx:xx:xx format, where "xx" is a 2-digit hexadecimal value.)
<port>
•
ether port number
Specify the Ethernet port number using a decimal value.
Use Mode Configuration mode (admin class)
Explanation Set static forwarding rules.
Caution
•
Address 00:00:00:00:00:00, the broadcast address, or multicast address, option
cannot be specified in <dst_addr>.
• This setting is disabled if VLAN specified in <vid> is not registered.
• This setting is disabled if the port specified by <port> is not set in the VLAN specified
by <vid>.
• If the port specified by <port> is a member of link aggregation ports, set it to forward
packets to the link aggregation ports.
• If the port specified by <port> is a backup port, set it to forward packets to the port used
for the backup port.
Default N/A