XG Series User's Guide Chapter 5 Command Reference
VLAN Information Settings
170
- For ACL to set ICMP
Result of multiplication between the number of ICMP TYPEs and the number of
ICMP CODEs for ICMP
- For ACL not to set TCP, UDP, or ICMP
1
You can expand the upper limit to use "resource filter distribution" command and
change resource distribution.
Note 4.
Up to 800 commands can be set for the entire device, including the definitions which
It is assumed that this option has not been set.refer to ACL such as "ether macfilter",
"ether qos aclmap", "vlan macfilter", "vlan ip6filter", "vlan qos aclmap", "vlan ip6qos
aclmap", "lan ip filter", "lan ip dscp", "lan ip6 filter", "lan ip6 dscp" and "serverinfo filter"
commands.
Default It is assumed that this option has not been set.
To Next Page
Loading...
