Fujitsu XG0224 - Acl Ip6

XG Series User's Guide Chapter 5 Command Reference
ACL Information Settings
242
5.12.1.4 acl ip6
Function Set ACL IPv6 definition
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax acl <acl_count> ip6 <src_addr>/<prefixlen> <dst_addr>/<prefixlen> [<protocol> [any]]
acl <acl_count> ip6 <src_addr>/<prefixlen> <dst_addr>/<prefixlen> [<protocol> [tc <value>]]
acl <acl_count> ip6 <src_addr>/<prefixlen> <dst_addr>/<prefixlen>
[<protocol> [dscp <value>]]
Options
<acl_count>
•
ACL definition number
Specify ACL definition number with a decimal number
<src_addr>/<prefixlen>
Specify source IPv6 and prefix length
• IPv6 address/prefix length
Specify IPv6 address and prefix length
• any
Any source IPv6 address
<dst_addr>/<prefixlen>
Specify destination IPv6 and prefix length
• IPv6 address/prefix length
Specify destination IPv6 and prefix length
• any
Any destination IPv6 address
<protocol>
Specify protocol number
• protocol number
Specify protocol number
• any
Any protocol number
<type>
•
tc
Specify Traffic Class value value
• dscp
Specify DSCP value
• any
Specify TOS value, DSCP value
<value>
•
Traffic Class value
Specify traffic class value
• DSCP value
Specify DSCP value with a decimal number from 0 to 63
Use Mode Configuration mode (admin class)
Explanation Set ACL IPv6 definition
Default N/A