Fujitsu XG0224 - Aaa User Password

XG Series User's Guide Chapter 5 Command Reference
AAA Information Settings
250
5.13.2.2 aaa user password
Function Set the authentication information (password).
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax aaa [<group_id>] user [<number>] password <password> [encrypted]
Options
<group_id>
•
Group ID
Specify a group ID with a serial decimal value.
The default is 0.
<number>
•
AAA user information definition number
Specify a group serial number with a decimal value.
The default is 0.
<password>
•
Authentication password
Specify the authentication password using up to 128 characters from 0x21, 0x23 to
0x7e ASCII set.
Specify the encrypted authentication password together with "encrypted" to be
displayed with the "show" command.
Correctly specify the character string displayed in the "show" command.
encrypted
•
Specify the encrypted authentication password
Specify it when setting the encrypted authentication password in <password>.
Use Mode Configuration mode (admin class)
Explanation Set the authentication information (authentication password) for authentication protocol.
Caution With the "show" command, the encrypted authentication password is displayed together
with "encrypted".
Default It is assumed that no authentication information (password) is specified.