Fujitsu XG0224 - Aaa Radius Client Server-Info Auth Source

XG Series User's Guide Chapter 5 Command Reference
AAA Information Settings
260
5.13.3.9 aaa radius client server-info auth source
Function Set the local IP address.
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax aaa [<group_id>] radius client server-info auth [<number>] source <address>
Options
<group_id>
•
Group ID
Specify a group ID with a serial decimal value.
<number>
•
Server definition number
Specify the definition number of the remote device with a decimal value.
The default is 0.
<address>
•
Local IP address
Specify the IPv4 or IPv6 address of the local RADIUS authentication server.
The allowable range is as follows:
-IPv4
1.0.0.1 to 126.255.255.254
128.0.0.1 to 191.255.255.254
192.0.0.1 to 223.255.255.254
-IPv6
::2 to fe7f:ffff:ffff:ffff:ffff:ffff:ffff:ffff
fec0:: to feff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
Use Mode Configuration mode (admin class)
Explanation Set the IP address of the local RADIUS authentication device. The IP address setting of
this definition supersedes that of the local RADIUS authentication device set by "aaa
radius auth source".
Default It is assumed that the IP address setting of the local RADIUS authentication device set by
"aaa radius auth source" is applied.