Fujitsu XG0224 - Show Terminal

XG Series User's Guide Chapter 5 Command Reference
Mode and Terminal Operation Commands
351
5.17.2.8 show terminal
Function Display the terminal information.
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax show terminal
Options N/A
Use Mode Operation mode (user class/admin class)
Configuration mode (admin class)
Explanation Display the terminal information.
Caution This command is an operation command; however, it can be displayed as the
configuration, where "candidate-config" and "running-config" are displayed with the same
values.
If this command is displayed as the configuration, only the set values other than the
defaults are displayed without being digit-aligned.
Execution Example
# show terminal
pager enable
window column 80 line 24
charset EUC
prompt login "\p"
prompt user "\u@\h \c\p"
prompt admin "\u@\h \c\w\p"
timestamp disable
bell enable
logging line 24
#