Fujitsu XG0224 - Copy

XG Series User's Guide Chapter 5 Command Reference
Configuration Display, Delete and Operation Commands
387
5.19.4.2 copy
Function Copies a file.
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax copy <src_filename> <dst_filename>
Options
<src_filename>
The source file to be copied.
<dst_filename>
The target file name.
Use Mode Operation mode (admin class)
Configuration mode (admin class)
Explanation Copies a file.
Filenames can be any of the below.
Filenames that can be used for <src_filename>:
candidate-config : candidate configuration file
running-config : Running configuration file
startup-config : Startup configuration file
config1 : Configuration 1 file
config2 : Configuration 2 file
firmware : Firmware
/cf0/anyfilename : A file on CompactFlash media
/um0/anyfilename : A file on USB memory
Filenames that can be used for <dst_filename>:
startup-config : Startup configuration file
config1 : Configuration 1 file
config2 : Configuration 2 file
firmware : Firmware
/cf0/anyfilename : A file on CompactFlash media
/um0/anyfilename : A file on USB memory
Execution Example
# copy conifg1 startup-config
#