Fujitsu XG0224 - Ethernet Counter, Log, Statistics, and Status Display and Clear Operation Commands; Ethernet Counter, Log, Statistics, and Status Display Commands; Show Ether

XG Series User's Guide Chapter 5 Command Reference
Ethernet Counter, Log, Statistics, and Status Display and Clear Operation
Commands
390
5.20 Ethernet Counter, Log, Statistics, and
Status Display and Clear Operation
Commands
This section explains commands related to Ethernet.
5.20.1 Ethernet Counter, Log, Statistics, and Status Display
Commands
This section explains the commands related to Ethernet counter, log, statistics, and status display commands.
5.20.1.1 show ether
Function Display the Ethernet physical port information.
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax show ether [line <line>]
Options
N/A
Display all information.
line <line>
•
Display the specified port information.
No information is displayed if the specified port number is invalid.
When specifying multiple port numbers, separate them with commas (,).
When specifying sequential numbers, separate them with hyphens (-). (Examples: "1-8")
Use Mode Operation mode (user class/admin class)
Configuration mode (admin class)
Explanation Display the specified Ethernet port information.
If the "line" option is specified, the information of the target port is displayed.
Range Model
1 to 26 XG0224
1 to 52 XG0448
1 to 44 XG0440DC / XG0440DCR
1 to 26,m1 XG02600