Fujitsu XG0224 - Page 421

XG Series User's Guide Chapter 5 Command Reference
Ethernet Counter, Log, Statistics, and Status Display and Clear Operation
Commands
421
Execution example when detail of XG2600 (10Giga port) is specified
The following information is also displayed when "detail" is specified.
46) Number of received MAC control frames
47) Number of sent MAC control frames
48) Number of frames abandoned when transmitting
49) Number of frame sending and receiving of 64 data size bytes.
And, it is numerical of the frame sending and receiving of (with data size of 65 to
127 bytes) size of data a second bytes. (frames/sec)
# show ether statistics line 1 detail
[ETHER PORT-1 STATISTICS]
[Input Statistics]
Octets : 1493377360
bits/sec : 0
Frames : 6706618
frames/sec : 0
Unicast : 6704279
frames/sec : 0
Multicast : 15
frames/sec : 0
Broadcast : 0
frames/sec : 0
Pause frames : 0
Mac Control frames : 0 ---(46)
Discards
All DiscardsPkts : 94732
Errors
Undersize : 0
FCSErrors : 0
AlignmentErrors : 0
FragmentErrors : 2324
Jabbers : 0
SymbolErrors : 0
UnknownOpcodes : 0
[Output Statistics]
Octets : 804468332
bits/sec : 0
Frames : 5109155
frames/sec : 0
Unicast : 5109152
Multicast : 0
frames/sec : 0
Broadcast : 3
frames/sec : 0
Pause frames : 0
Mac Control frames : 0 ---(47)
Discards
DiscardsPkts : 0 ---(48)
DelayExceededDiscards : 0
Errors
Undersize : 0
FCSErrors : 0
FragmentErrors : 0
[Detail Statistics]
Frame size frames frames/sec
64 : 0 0 ---(49)
65-127 : 0 0 ---(50)
128-255 : 0 0 ---(51)
256-511 : 0 0 ---(52)
512-1023 : 0 0 ---(53)
1024-1518 : 0 0 ---(54)
1519-16128 : 0 0 ---(55)