Fujitsu XG0224 - Show Ipv6 Route Summary

XG Series User's Guide Chapter 5 Command Reference
Routing Table Entry Display Commands
454
5.26.2.2 show ipv6 route summary
Function Display number of routes registered in IPv6 routing table
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax show ipv6 route summary [all]
Options
N/A
Display number of routes registered in IPv6 routing table
all
Display all IPv6 route information
Use Mode Operation mode (user class/admin class)
Configuration mode (admin class)
Explanation Display number of routes registered in IPv6 routing table
Execution Example
1) Route Source
The routing protocol type is displayed.
Static : Indicates the static route information.
RA : Indicates the default route by receiving Router Advertisement (RA).
Connected : Indicates the interface route information.
Total : Indicates the total number.
2) Networks
The number of route is displayed.
# show ipv6 route summary
Route Source Networks
(1) (2)
------------ --------
Static 3
RA 0
Connected 7
Total 10