Fujitsu XG0224 - Show Qos Prioritymap

XG Series User's Guide Chapter 5 Command Reference
QoS Counter, Log, Statistics, and Status Display Commands
512
5.31.1.2 show qos prioritymap
Function Display the correspondence between the COS value and storage queue for a packet.
Available Model XG2600
Syntax show qos prioritymap [line <line>]
Options N/A
Display the relationship between packet COS values and their storage queues of all
ports.
line <line>
•
Display the relationship between packet COS values and their storage queues of the
specified port.
When specifying multiple port numbers, separate them with commas (,).
When specifying sequential numbers, separate them with hyphens (-). (Example: "1-8")
Use Mode Operation mode (user class/admin class)
Configuration mode (admin class)
Explanation Display the relationship between packet COS values and their storage queues.
Execution Example
1) Port : Ethernet physical port number
2) Priority value : Queue
COS value of packet :Storage queue
Range Model
1 to 26 XG02600
# show qos prioritymap line 1-5
Port Priority value : Queue, ...
---- --------------------------------------
(1) (2)
1 0:1, 1,0, 2:1, 3:3, 4:4, 5:5, 6:6, 7:7
2 0:1, 1,0, 2:1, 3:3, 4:4, 5:5, 6:7, 7:6
3 0:1, 1,0, 2:1, 3:3, 4:4, 5:5, 6:5, 7:5
4 0:1, 1,0, 2:1, 3:3, 4:5, 5:4, 6:6, 7:7
5 0:1, 1,0, 2:1, 3:3, 4:4, 5:5, 6:6, 7:7